TestKits and photometers for the analysis of process, drinking and/or swimming pool water
Cullwater offers a wide range of test kits and analytical instruments for a complete analysis of the various chemical parameters of process, drinking and/or swimming pool water. Their easy use allows them to be used both by the end user and by sector operators, proving to be extremely helpful in the evaluation and management of the water/pool treatment systems themselves.
TestKit / Tester
Test Kit fore the control of single chemical water parameters with two modality of analysis: with colorimetric scale or with titolation
Tester pH
Calibration in 1 point
Scale: 0.0 a 14.0 pH
Precision: ± 0.2 pH
Watertight pH / °C tester
Display at 2 livel
Automatic calibration in 2 points
Scale: –2.0 a 16.0 pH/ 0.0-60.0 °C
Precision: ± 0.1 pH / ±1° C
Automatic compensation of the temperature
Replaceable pH electrode
pH / Redox / °C waterproof Tester
Display at 2 livel
Automatic calibration in 2 points
Scale: 2.00 a 16.00 pH / ± 1000mV Redox / -5.0 a 60.0 °C
Precision ± 0.01 pH; 1mV
Replaceable combined electrode
Salinità / Conducibilità / °C waterproof Tester
Display at 2 livel
Automatic calibration in 2 points
Scale: 3999 µs/cm / 2000 ppm. 0 a 60.0 °C
Precision: 1 µs/cm / 1 ppm
Replaceable combined electrode
Portable instruments
Portable instruments suitable to every necessity of utilization
pH / °C instrument
Automatic calibration in 1 o 2 punti
Scale: -2.00 a 16.00 pH; -5.0 a 80°C
Risolution 0.01 pH
Precision ± 0.02 pH
Automatic compensation of the temperature
Supplied with an amplified probe pH/Temperature, 9 V battery, solutions of setting pH 4.01 (20 ml), pH 7.01 (20 ml), pH 10.01 (20 ml), cleaning solution (20ml) and user manual.
Strumento pH / Redox / °C
Automatic calibration in 1 o 2 punti
Scale: -2.00 a 16 pH, -2000 a + 2000 mV, -5.0 a 80.0 °C
Risolution 0.01 pH / 1 mV / 0.1 °C
Precision (25 °C) ± 0.02 pH / ±2 mV, ±0.5 °C til a 60 °C, ± 1 °C and automatic compensation of the temperature
Supplied with an amplified probe pH/Redox/Temperature 9 V battery, setting solution pH (20 ml) pH 7.01 (20 ml) pH.10.01 (20 ml), cleaning solution (20 ml) and user manual.
pH / Conductivity / TDS / °C multiparameter instrument
pH Calibration in 1 or 2 points with automatic recognition of the samples calibration automatic conductibility in 1 point
Scale: 0.00 – 14.00 pH, 0 – 3999 µs/cm, 0 – 1999 ppm, 0.0 – 60.0 °C
Risolution 0.01 pH / 1µs/cm / 1 ppm / 0.1 °C
Precision (at 25 °C) ±0.01 pH / ±2% fs / ±0.5 °C
automatic compensation of the temperature
Supplied with an amplified probe, 9 V battery, some solutions of setting pH 4.01 (20 ml) pH 7.01 (20 ml), cleaning solution (20 ml), solution of setting conductibility 1413 µS/cm (20 ml) and user manual.
Conductivity / TDS / NaCl / °C instrument
Automatic calibration
Scale: 0.0 – 2999 µs/ cm, 3.00 – 500.0 ms/cm; 0.00 – 1499 mg/l, 1.50 – 400.0 g/l; NaCl 0.0 – 400.0 %; -9.9 – 120.0 °C
Automatic compensation of the temperature, possibility to register more than 250 values in the memory
Auto ranging function, function of (hold) auto end point
Supplied with a PC software, probe, 9 V battery, solution of setting conductibility 12880 µS/cm (bottle 230 ml) and user manual.
Dissolved Oxygen instrument (D.O.)
Automatic air calibration a
Scale 0.0 – 45.00 mg/l O2; 0.0 – 300 % O2; 0.0 – 50.0 °C
Risolution 0.01 mg/l O2; 0.1 % O2; 0.1 °C
Precision: (at 25°C) ± 0.3 mg/l O2; ± 1.5% f.s. %O2, ± 0.5°C
Automatic compensation of the temperature, of the altitude from 0 at 4 km and from the salinity from 0 to 80 g/l, resolution 1 g/l
Supplied with a probe, 9 V battery, an electrolyte solution (bottle of 20 ml), 2 membranes and user manual.
Multi-Parameter photometers
Multi-parameter photometeres with use of reagents already prepared for analysus
Free and Total Chlorine instrument
Scale: 0.00 – 5.00 mg/l of Cl2 (free and total)
Precision: ± 0.04 mg/l at 1.50 mg/l
Supplied in rigid suitcase with reagents, 2 cuvettes, cleaning cloth and user manual.
pH and Total/ Free Chlorine instrument
Scale: 0.00 – 5.00 mg/l of Cl2 (free and total); pH 6,5 – 8,0
Precision: ± 0.04 mg/l at 1.50 mg/l; ± 0,1 pH at 7,2 pH
Supplied in rigid suitcase with reagents, 2 cuvettes, cleaning cloth and user manual.
pH – Total and Free Chlorine – Cyanuric acid – Hardness – Alkalinity instrument
Scale: Chlorine 0,05 – 4,00 ppm; pH 6,5 – 8,4; Cyanuric acid 2 – 160 ppm; Hardness 50 – 500 mg/l; Alkalinity 5 – 200 mg/l
Reading of the values through wide digital display with 3 numerals.
Supplied with suitcase, reagents, battery and accessories for the cleaning. User manual.
Turbidimeter
Calibration on three points 0, 10 and 500 FTU
Scale: FTU 0.00 – 50.00 and 50 – 1000 FTU
Resolution 0.01 (0.00 – 50.00 FTU) and 1 (50 – 1000 FTU)
Light source with infrared Led, a sensor at photocell in silicon, a power supply through battery, with switch off after 5 minutes from the last utilization.
Supplied in rigid suitcase with solutions of calibrations, measuring cuvettes, cleaning cloth and user manual.
Ammonia MR – Nessler method instrument
Scale: 0.00 – 9.99 mg/l (NH3-N)
Precision: ± 0.10 mg/l at 5.00 mg/l
Supplied in rigid suitcase with two cuvetts, reagents, cleaning cloth and user manual.
Ammonia LR – Nessler method instrument
Scale: 0.00 – 3.00 mg/l (NH3-N)
Precision: ± 0.04 mg/l at 1.50 mg/l
Supplied in rigid suitcase with two cuvetts, reagents, cleaning cloth and user manual.
Iron HR instrument
Scale: 0.00 at 5.00 mg/l of Fe
Precision: ± 0.03 mg/l at 1.50 mg/l
Supplied in rigid suitcase with two cuvetts, reagents, cleaning cloth and user manual.
Phosphate LR instrument
Scale: 0.00 at 2.50 mg/l of PO4
Precision: ± 0.04 mg/l at 1.00 mg/l
Supplied in rigid suitcase with two cuvetts, reagents, cleaning cloth and user manual.
Chlorides instrument
Scale: 0.00 at 20.00 mg/l of Cl-
Precision: ± 0.4 mg/l at 10.0 mg/l
Supplied in rigid suitcase with two cuvetts, reagents, cleaning cloth and user manual.