Regulazione and measuring's system

Control instrument integrated
Wall instruments

Assembled panels for the measure and the control of: PH – redox and free chlorine – Electric conductibility – Melted oxygen – Capacity – Temperature – Turbidity

Control instrument integrated

Version with metering pumps with a control instrument integrated

PHMV – PP

Panel for the measuring and regulation of the pH value and of the Redox (ORP) potential

  • Fields of regulation from 0-14 pH and 0-900 mV
  • 2 metering pumps model PPPH and PPRX with integrated instrument and level probes
  • pH electrode
  • RX electrode
  • Automatic calibration with quality control of the electrodes
  • Mechanical filter at the water’s entrance
  • Electrode holder
  • Panel measures in mm. L x H: 450 x 500
pannello pompe dosatrici

Wall instruments

Version with wall-instruments

PHMV – P

Panel for the measure and the regulation of the pH value and of Redox potential (ORP)

  • Control instrument mod. PHMV-S: fields of regulation from 0-14 PH (resolution 0.01 PH) and 0-999 mV (resolution 1 mV). 2 on-off or proportional set points, exit 0/4…20 mA. Compensation of the temperature in pH with E-TL probe (optional). Instrument in box IP65.
  • 2 metering pumps with proportional dosage mod. PPMF. Capacity of the dosage: 4 – 24 Lt/h. Pressure: 0 – 12 Bar
  • PH probe
  • RX probe
  • Mechanical filter at the water’s entrance
  • Probe holder with flow sensor
  • Panel measures in mm. L x H: 600 x 700
  • Optional: Additional metering pumps installed on the panel for the dosage of flocculant and algaecide.
pannello pompe dosatrici phmv p

PHCL – P

Panel for the measure and the regulation of the pH value and of free Chlorine

  • Control instrument mod. PHCL-S: fields of regulation from 0-14 PH (resolution 0.01 PH) and 0-10 mg/l Cl2 (resolution 0.01 mg/l Cl2). 2 on-off or proportional set points, exit 0/4…20 mA. Compensation of the temperature in pH with E-TL probe (optional). Instrument in box IP65.
  • 2 metering pumps with proportional dosage mod. PPMF. Capacity of the dosage: 4 – 24 Lt/h. Pressure: 0 – 12 Bar
  • PH electrode
  • Amperometric cell for free chlorine (organic and inorganic)
  • Mechanical filter at the water’s entrance
  • Probe holder with flow sensor
  • Panel measures in mm. L x H: 600 x 700
  • Optional: Additional metering pumps installed on the panel for the dosage of flocculant and algaecide
pannello pompe dosatrici phcl p